Call: +44 (0)1622 872401
Address: Unit 1 Branbridges Industrial Estate, East Peckham, Kent

MPB Series 1200BV-ANS/230 Anaesthetic Variable Area Flowmeter

GENERAL INFORMATION

This version of the MPB Series 1200BV-ANS/230 Flowmeter is manufactured exclusively to house an anaesthetic 230mm standard length flow tube and will give an instantaneous flow rate of the standard anaesthetic gases.

The MPB Series 1200BV-ANS/230 Anaesthetic Flowmeter has an overall length of 300mm, with process centres of 275mm.

This flowmeter can be supplied with either straight through, or rear facing connections (G¼”).

The anaesthetic flow tube supplied with this instrument is fully compliant to ISO 5358 and BS4272.

Normally the flow tube supplied exhibits dual scale calibration whereby the first third of the flow range is dedicated to 0.1-1 L/min and, for example, 2-10 L/min would be a linear scale for the remainder of the scale length.

The MPB Series 1200BV-ANS/230 Anaesthetic Flowmeter is supplied with an integral flow control valve.

The flowmeter has a photo luminescent backing to provide a degree of back lighting in the event of power failure.

The flow tube is fully conductive, both internally and externally, and is compliant to the international standard for human and veterinary anaesthesia flow measurement.

The flow tube utilises serial numbered floats and flow tubes to guard against incorrect reassembly when cleaning. In addition, the float exhibits a white dot so that the operator can clearly see the rotation.

The flow tube is supplied complete with colour banding to international standards. We can also supply colour banding to other requirements.

The flowmeter is fitted with a contact device to earth the flow tube through to the mounting studs and chassis. This is to prevent any static build up.

In addition to standard anaesthetic gases, MPB can supply calibrated flow tubes for xenon, heliox, entinox, nitrox and nitric oxide as typical examples.

The MPB Series 1200BV-ANS/230 Anaesthetic Flowmeter has nickel plated brass end connections, however, stainless steel can be supplied if required at an additional cost.

Download Technical Bulletin which shows standard flow rates: Technical Bulletin

For further information please complete the form below, or contact us direct by telephone or e-mail.

Tel: +44 (0)1622 872401
Email: sales@mpbflowmeters.com

 

Description

MPB 1200BV-ANS/230 ANAESTHETIC VARIABLE AREA FLOWMETER FEATURES

  • VALVED, OR NON-VALVED VERSIONS
  • STRAIGHT THROUGH, OR REAR FACING CONNECTIONS
  • FRICTIONLESS, HENCE LOW HEAD LOSS
  • ELEGANT AND ROBUST DESIGN
  • EASY TO READ SCALE
  • EASY IN-SITU TUBE REMOVAL AND RE-INSTALLATION
  • STANDARD OR CUSTOMISED FLOW SCALES AVAILABLE
  • DIRECT READING OF INSTANTANEOUS FLOW RATE
  • POLYCARBONATE SAFETY COVER
  • MINIMAL MAINTENANCE
  • COLOUR BANDING TO INTERNATIONAL STANDARD (PLEASE SPECIFY WHEN ORDERING)
  • LONG SERVICE LIFE

SPECIFICATION

Chassis: Anodised aluminium to BSEN12373
End Blocks: Nickel plated Brass, Stainless Steel
Process Connections: G¼” rear facing or straight through
Valve Stem: Stainless steel,
Cover: Polycarbonate
Seals: Viton
Metering Tube: Borosilicate glass 230mm long with permanently fired scale and fully conductive to ISO 5358 and BS 4272
Scale: Permanently fired (black)
Weight: 670 grams
Plumb Bob Floats: Red hard anodised aluminium with white rotation indicator
Maximum Working Pressure: Gas: up to 20 bar g (non-shock)

NOTE: All flow tubes calibrated at 1013 mbar abs 20°C

Maximum Working Temperature: 100°C Viton
Accuracy: All flow tubes supplied with this instrument have been calibrated to confirm their accuracy falls within the limits set by ISO 5358 and Class 2.5 VDI/VDE 3513. All calibration equipment is traceable to National UK Standards

 

Reviews

There are no reviews yet.

Be the first to review “MPB Series 1200BV-ANS/230 Anaesthetic Variable Area Flowmeter”

Your email address will not be published.