Call: +44 (0)1622 872401
Address: Unit 1 Branbridges Industrial Estate, East Peckham, Kent

Series 225 Humidifier

The MPB Series 225 Humidifier is designed for use where a portable humidifier is required on the outlet of an oxygen therapy flowmeter.

CAP: The standard cap has an offset connection to assist the user in keeping the humidifier away from the oxygen cylinder if bottle mounted when setting up. The cap incorporates a convoluted knob to lock the humidifier in place.  This is moulded from a material suitable for steam sterilization up to 121oC.

INLET CONNECTION: Male ½” BSF thread.

BOTTLE: This is manufactured from Homopolymer Polypropylene (HPPP) and has a capacity of 225ml.

SEALS: There are two Nitrile seals provided, one for the cap and one to seal the ‘o’ ring to the flowmeter.

CONNECTION TUBE:  This is manufactured from high temperature silicone tube

FILTER;  The filter is manufactured from a suitable grade of bronze and has a specific porosity to  ensure correct characteristics.

STERILIZATION:  The complete humidifier is suitable for steam sterilization at 121oC for 15 minutes.

TESTING:  Every humidifier is flow tested to ensure the pressure drop does not exceed 13” water gauge in line with   our ISO 9001 procedures.

DIMENSIONS:  Overall Height: 154mm, Bottle Diameter: 76mm

PACKAGING:  Each humidifier is packed with a batch number label, which can be recorded for reference purposes.  Weight: 75g

 

Download Technical Bulletin: Technical Bulletin

 

For further information please complete the form below, or contact us direct by telephone or e-mail.

Tel: +44 (0)1622 872401
Email: sales@mpbflowmeters.com

 

 

Category:

Description

The MPB Series 225 Humidifier is designed for use where a portable humidifier is required on the outlet of an oxygen therapy flowmeter.

CAP

The standard cap has an offset connection to assist the user in keeping the humidifier away from the oxygen cylinder if bottle mounted when setting up. The cap incorporates a convoluted knob to lock the humidifier in place.  This is moulded from a material suitable for steam sterilization up to 121oC.

INLET CONNECTION

Male ½” BSF thread.

BOTTLE

This is manufactured from Homopolymer Polypropylene (HPPP) and has a capacity of 225ml.

SEALS

There are two Nitrile seals provided, one for the cap and one to seal the ‘o’ ring to the flowmeter.

CONNECTION TUBE

This is manufactured from high temperature silicone tube

FILTER

The filter is manufactured from a suitable grade of bronze and has a specific porosity to  ensure correct characteristics.

STERILIZATION

 The complete humidifier is suitable for steam sterilization at 121oC for 15 minutes.

TESTING

Every humidifier is flow tested to ensure the pressure drop does not exceed 13” water gauge in line with   our ISO 9001 procedures.

DIMENSIONS

Overall Height: 154mm, Bottle Diameter: 76mm

PACKAGING

Each humidifier is packed with a batch number label, which can be recorded for reference purposes.

Weight: 75g

 

 

Reviews

There are no reviews yet.

Be the first to review “Series 225 Humidifier”

Your email address will not be published.